BCMSN -
Building Converged Cisco Multilayer Switched Networks
Multilayer Switching
Module
1: Campus Networks and Design Models
1.1
Overview of a Campus Network
1.2 Key
Characteristics of Various Switching Technologies
1.3
Building-Block Approach
1.4
Basic Configuration of the Switch
1.5
Important IOS Features
1.6
Hands-on Lab Exercises
Module 2: VLANs and VTP
2.1 VLAN
Basics
2.2 VLAN
Security
2.3 VLAN
Types
2.4
Configuring VLANs and VMPS
2.5 VLAN
Trunking and Dynamic Trunking Protocol (DTP)
2.6 VLAN
Identification
2.7 VTP
Trunking Protocol (VTP)
2.8 VTP
Configuration and VTP Pruning
2.9
Hands-on Lab Exercises
Module 3: Spanning-Tree Protocol
3.1
Spanning-Tree Protocol Operation
3.2 STP
Processes
3.3 STP
Enhancements
3.4
802.1w Rapid Spanning-Tree Protocol
3.5
Evolution of Spanning Tree
3.6 STP
Configuration
3.7
Tuning, Verifying, and Troubleshooting Spanning-Tree Protocol
3.8 RSTP
and MST Configuration
3.9
EtherChannel
3.10
Hands-on Lab Exercises
Module 4: Inter-VLAN Routing
4.1
Methods of Inter-VLAN Routing
4.2
Configuring Inter-VLAN Routing
4.3
Hands-on Lab Exercises
Module 5: Implementing Multilayer Switching
in the Network
5.1
Multilayer Switching
5.2
Cisco Express Forwarding
5.3 MLS
and CEF Configuration Tasks
5.4
Hands-on Lab Exercise
Module 6: Redundancy
6.1
Implementing Module Redundancy in a Multilayer Switched
Network
6.2
Implementing Router Redundancy in a Switched Network
6.3 HSRP
Operations
6.4 HSRP
Configuration
6.5
Hands-on Lab Exercises
Module 7: Cisco AVVID
7.1
Introduction to Cisco AVVID
7.2
Examining Multicast in a Multilayer Switched Network
7.3
Routing Multicast Traffic
7.4
Cisco IP Telephony
7.5
Voice Quality Issues
7.6
Network Design Issues for Voice
Module 8: Quality of Service
8.1
Quality of Service Requirements
8.2
Quality of Service Mechanisms
8.3
Classification at the Access Layer
8.4
Policing and Marking
8.5
Scheduling
8.6
Congestion Avoidance
8.7
Traffic Shaping
8.8 QoS
Using Low Speed Links
8.9
Hands-on Lab Exercises
Module 9: Monitoring and Security
9.1
Monitoring Switched Network Performance with SPAN and VSPAN
9.2
RSPAN
9.3
Network Analysis Modules and Switch Fabric Modules
9.4
Basic Security
9.5
Securing Remote Management
9.6
Securing User Access
9.7
Authentication, Authorization, and Accounting
9.8
802.1X Port-based Authentication
9.9
Hands-on Lab Exercises
Module 10: Transparent LAN Services
10.1
Ethernet Solutions for Transparent LAN Services
10.2
Introducing Transparent LAN Services Architecture
10.3
Examining Fiber Optic Transports
|